دانگل موس وایرلس لاجیتک

[AMD>INTEL]

البته این کارها رو انجام بده ببین میتونی با دانگل مایکرو سافت ردیفش کنی
1. put a good battery in the VX revolution (- inside, + towards the end of mouse)

2. INSTALL the setpoint software before you insert the USB receiver to the PC.

3. once software installed, I believe it will ask you to insert the USB receiver to PC.

4. make sure the setpoint software is running in Windows, then press and HOLD the left click button of the mouse.

5. press the on/off button once at the bottom of the mouse (still holding the left button).

6. the moment you release the on/off button, quickly press the right click button 5 times and RELEASE both left and right click button at the same moment!

Now your mouse should sync to your PC, I believe at this point, the bottom light beside the on/off button will light up green color.

-----
When the mouse is connected with PC, there is no light on top of the mouse.
There is no light on the perform laser "circle", because this is a laser mouse not optical mouse. The only place you may see a light is the green light next to the on/off button. And sometimes that light is off as well... (does not always glows in green constantly)