خطای Q-cod 8 در مادربرد asus crossbar vi hero

[AMD>INTEL]

رم ها کارت گرافیک وتمام کابل های data رو در آوردم باز هم همون خطا رو دادDSC_0363.jpgDSC_0363.jpgDSC_0363.jpg

- - - Updated - - -

پردازنده چک شد پیچ واتر کولر کمی آزاد شد خطا8

- - - Updated - - -

مشکل از ابدیت بایوس نباشه چون با فلش ابدیت کردم؟

- - - Updated - - -

چطور ابدیت بایوس رو به حالت اول برگردونم شاید با این کار خطا حل بشه

فلش بک بایوس داره این مادربرد . تو دفترچه راهنما و سایت اسوس روش این کار وجود دارد .

https://www.youtube.com/watch?v=SPjxccmhWCQ 

1. Download the newest Stable Bios from the support Site ( not the Beta Bios 5704 it has an thermal sensor bug )
http://dlcdnet.asus.com/pub/ASUS/mb/...664.1488380457

2. Unrar the archieve and rename the .cab file to C6H.cap . After that that you put the .cap file to your usb stick and stick the stick the UsB-Drive to the UsB-Port that is called Bios (have a white Square around it . After that you must click the flashbackkey at the backside of your board . Wait till it have completly stop blinking (can took some minutes) . After that click the clear cmos Button .

3. Now your Board is ready to start with the Ryzen CPU . So you can install all your components to the Borad . Make sure all cables are connected correctly .

4. Press F2 or the del key to go in the Bios and do the usual thing there. If you have done you settings save it .

5 . Now you can install your Windows. After that install the drivers from the support Website https://www.asus.com/Motherboards/RO...Desk_Download/.

6. Now you have finished the work and can have fun with the ryzen .