English Articles

[Master]

How To Make Free Phone Calls

 Have you ever got stuck some ware and just about 6'ft away from you there is a pay phone, but yet you dont have any change(=( bummer) to call your famaly members or some one to come and pick you up(hehe that sux)?

Well im going to show you some thing that might get you arrested(shit now what) or it might get you home( now thats what im talking about!)its a chance that you have to take depends were are you.

Ok now before we go on let me let you know that this is not thateasy to do, but anyways lets start. A pay phone is not like a regular home phone. A pay phone runs through a diffrent amount of electricity and wires even the electricity flow is diffrent, Well anyways that is enoght of electrical talk lets get to the good part.

Ok to get free call's on a pay phone you will frist have to twist the phone wire just about 50 to 60 times then you will pull on the phonewire untill the metal part crackes off phone keep doing it if the metalpart is completely off the phone....
Now assuming that it is off you willsee a few colored wires in side the metal wire of the pay phone there should be a black, red, yellow one in side it and a really metallthick one in the middle(NOTE that some phone has diffrent colored wires)now the one wire that we are looking for is the black one. Now here ishow its done.. rip off the plastic of that wire(you can take it out with your teeth, you wont get electricuted =) hehe ).

Now assuming that you have taken apart the plastic off the wire(does not has to be all of it)now you will take that wire and aply it to the phone with the metal part of the phone touching the wire that you ripped off its plastic.. if you are aplying it correctly then you should here a static on the phone.. so make sure you have that phone on your ear.. now with the wire being aplyed to the phone(the metal part right next tothe buttons)Dial the number that you wish to call.. onces you hear it ringing then you can let go of the wire that you was applying.. and BINGO... say hello to mami and daddy for me =).. welp that is all enjoy your call.. ohh and by the wayyes this also comes with long distance hehe, and no! you can not use it to logg on to aol... Peace.

site: www.h4ckerx.net
Aim: xlordt
Irc: irc.h4ckerx.net

Email: xlordt@h4ckerx.net

Copyright @h4ckerx.net 

[Master]

How to make key generators?
-===========================-
Introduction
------------
I take no responsibility of the usage of this information.
This tutorial, is for educational knowledge ONLY.
Hi there, in this tutorial, I intend to teach you how to make a pretty
simple keygen, of a program called W3Filer 32 V1.1.3.
W3Filer is a pretty good web downloader...
I guess some of you might know the program.
I`ll assume you know:
A.How to use debugger (in this case, SoftIce).
B.How to crack, generally (finding protection routines,patching them,etc...).
C.How to use Disassembler (This knowledge can help).
D.Assembly.
E.How to code in Turbo Pascal ™.
Tools you`ll need:
A.SoftIce 3.00/01 or newer.
B.WD32Asm. (Not a must).
C.The program W3Filer V1.13 (if not provided in this package), can be found in
www.windows95.com I believe.
D.Turbo Pascal (ANY version).
Well, enough blah blah, let's go cracking...
Run W3Filer 32.
A nag screen pops, and , demands registration (Hmm, this sux ;-)) Now,
We notice this program has some kind of serial number (Mine is 873977046),
Let's keep the serial in mind, I bet we`ll meet it again while we're on
the debugger.
Well, now, let's put your name and a dummy reg code...
set a BP on GetDlgItemTextA, and, press OK.
We pop inside GetDlgItemTextA, Lets find the registration routine...
I`ll save you the work, the registration routine is this:
:00404DB2 8D95A8FAFFFF lea edx, dword ptr [ebp+FFFFFAA8]
:00404DB8 52 push edx ---> Your user name here.
:00404DB9 E80B550000 call 0040A2C9 ---> Registration routine.
:00404DBE 83C408 add esp, 00000008 ---> Dunno exactly what is it.
:00404DC1 85C0 test eax, eax ---> Boolean identifier, 0 if
:00404DC3 7D17 jge 00404DDC ---> registration failed, 1 if
OK.
Well, Let's enter the CALL 40A2C9, and see what's inside it:
(Please read my comments in the code).
* Referenced by a CALL at Addresses:
|:00404DB9 , :00407F76
|
:0040A2C9 55 push ebp
:0040A2CA 8BEC mov ebp, esp
:0040A2CC 81C4B0FEFFFF add esp, FFFFFEB0
:0040A2D2 53 push ebx
:0040A2D3 56 push esi
:0040A2D4 57 push edi
:0040A2D5 8B5508 mov edx, dword ptr [ebp+08]
:0040A2D8 8DB500FFFFFF lea esi, dword ptr [ebp+FFFFFF00]
:0040A2DE 33C0 xor eax, eax
:0040A2E0 EB16 jmp 0040A2F8
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A2FB©
|
:0040A2E2 0FBE0A movsx ecx, byte ptr [edx] ----> Here Starts the
interesting part.
:0040A2E5 83F920 cmp ecx, 00000020 ----> ECX is the the current
char in the user name, Hmm, 20h=' '...
:0040A2E8 740D je 0040A2F7 ----> Let's see,
:0040A2EA 8A0A mov cl, byte ptr [edx] ----> Generally, all this loop
does, is copying
the user name from
[EDX], to [ESI], WITHOUT the spaces!
(Keep this in mind! ).
:0040A2EC 880C06 mov byte ptr [esi+eax], cl
:0040A2EF 42 inc edx
:0040A2F0 40 inc eax
:0040A2F1 C6040600 mov byte ptr [esi+eax], 00
:0040A2F5 EB01 jmp 0040A2F8
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A2E8©
|
:0040A2F7 42 inc edx
* Referenced by a (U)nconditional or ©onditional Jump at Addresses:
|:0040A2E0(U), :0040A2F5(U)
|
:0040A2F8 803A00 cmp byte ptr [edx], 00
:0040A2FB 75E5 jne 0040A2E2 ----------------> This is the loop , we got
what it does,
Let's continue tracing
the code...
:0040A2FD 56 push esi --------> The user name is pushed, in order
to
Upcase it's chars.
* Reference To: USER32.CharUpperA, Ord:0000h
|
:0040A2FE E80F330000 Call User!CharUpper ---> After this, our name is in
upper case.
:0040A303 56 push esi -----> Our name in upper case here.
* Reference To: cw3220mt._strlen, Ord:0000h
|
:0040A304 E86F300000 Call 0040D378 ---> This is the length of our name.
:0040A309 59 pop ecx
:0040A30A 8BC8 mov ecx, eax ---> ECX=Length.
:0040A30C 83F904 cmp ecx, 00000004 ---> Length>=4 (MUST).
:0040A30F 7D05 jge 0040A316 ---> Let's go to this address...
:0040A311 83C8FF or eax, FFFFFFFF
:0040A314 EB67 jmp 0040A37D
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A30F©
|
:0040A316 33D2 xor edx, edx
:0040A318 33C0 xor eax, eax
:0040A31A 3BC8 cmp ecx, eax
:0040A31C 7E17 jle 0040A335 ---> (Not important, just another useless
checking).
===================================================================================
============ FROM HERE AND ON, THE IMPORTANT CODE, PAY ATTENTION ==================
===================================================================================
One thing before we continue, EDX = 00000000h as we enter to the next instructions.
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A333©
|
:0040A31E 0FBE1C06 movsx ebx, byte ptr [esi+eax] ---> EBX <--- char in user
name, offset EAX.
:0040A322 C1E303 shl ebx, 03 -----> Hmm, it shl's the char by 03h...
(Remember that).
:0040A325 0FBE3C06 movsx edi, byte ptr [esi+eax] ---> Now EDI <--- Char in
user name , offset EAX.
:0040A329 0FAFF8 imul edi, eax -----> It multiplies the char by the
offset in user name! (Remember that).
:0040A32C 03DF add ebx, edi -----> Adds the result to EBX (That was
Shelled (Ding Dong =)).
:0040A32E 03D3 add edx, ebx -----> EDX=EDX+EBX!!! - This is the CORE
of this registration routine!!!
:0040A330 40 inc eax -----> Increase EAX by one (next char).
:0040A331 3BC8 cmp ecx, eax
:0040A333 7FE9 jg 0040A31E ----> If ECX<EAX then, we leave the
loop.
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A31C©
|
:0040A335 A120674100 mov eax, dword ptr [00416720] ---> HMMMMMM, What's in
here?????
:0040A33A C1F803 sar eax, 03 ---------> WAIT! Please type in SIce '?
EAX'
Does this number in EAX look
familiar to us? ;-)
If you still don`t understand,
than, It's
our SERIAL NUMBER! (PLEASE, take
your time, and check by
yourself - don`t trust me!). OK,
so now we know,
That it SHR's EAX by 03 (SAR is
almost identical to SHR).
:0040A33D 03D0 add edx, eax ---------> Hmm, it adds the result from the
loop, the serial number shr'd by 03h
:0040A33F 52 push edx -------> Let's continue. (At this point, I
can tell you , the reg number, is
in EDX - only that the reg number
is in HEX --> That's how you enter it).
* Possible StringData Ref from Data Obj ->"%lx"
|
:0040A340 685EF54000 push 0040F55E
:0040A345 8D95B0FEFFFF lea edx, dword ptr [ebp+FFFFFEB0]
:0040A34B 52 push edx
* Reference To: USER32.wsprintfA, Ord:0000h
|
:0040A34C E8E5320000 Call 0040D636 -------> This one, does HEX2STR (Takes
the value from EDX, and turns it to an hex string).
:0040A351 83C40C add esp, 0000000C
:0040A354 8D8DB0FEFFFF lea ecx, dword ptr [ebp+FFFFFEB0] -----> type 'd ecx' -
THIS is the reg number! That's enough for us, the rest of
the code, is
just for comparing the correct reg code with ours.
:0040A35A 51 push ecx
* Reference To: USER32.CharLowerA, Ord:0000h
|
:0040A35B E8B8320000 Call 0040D618
:0040A360 8D85B0FEFFFF lea eax, dword ptr [ebp+FFFFFEB0]
:0040A366 50 push eax
:0040A367 FF750C push [ebp+0C]
* Reference To: cw3220mt._strcmp, Ord:0000h
|
:0040A36A E875300000 Call 0040D3E4
:0040A36F 83C408 add esp, 00000008
:0040A372 85C0 test eax, eax
:0040A374 7405 je 0040A37B
:0040A376 83C8FF or eax, FFFFFFFF
:0040A379 EB02 jmp 0040A37D
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A374©
|
:0040A37B 33C0 xor eax, eax
* Referenced by a (U)nconditional or ©onditional Jump at Addresses:
|:0040A314(U), :0040A379(U)
|
:0040A37D 5F pop edi
:0040A37E 5E pop esi
:0040A37F 5B pop ebx
:0040A380 8BE5 mov esp, ebp
:0040A382 5D pop ebp
:0040A383 C3 ret
Making the actual Keygen
~~~~~~~~~~~~~~~~~~~~~~~~
Now, after I've explained how does the program calculate the registration
code, you can either write your own keymaker, without looking at my code, or
look at my code (in Turbo Pascal - sorry for all you C lovers ;-) Next time).
That's it, here's the source of my keygen:
------------------- Cut here ---------------------------------------------
Program W3FilerKeygen;
var
Key,SerialNum,EB,ED,digit:Longint;
I,x:Byte;
Name,KeyHex:String;
begin
Writeln(' W3Filer32 V1.1.3 Keymaker');
writeln('Cracked by ^pain^ ''97 / Rebels!');
Write('Your Name:'); { Read the name }
readln(Name);
Write('Serial Number:');
readln(SerialNum); {Yes, we need the serial number for the calculation!}
Key:=0;
x:=0;
For I:=1 to length(Name) do
begin
Name[I]:=upcase(Name[i]);
If Name[I]<>' ' then begin
eb:=ord(Name[I]) shl 3; {EB = Name[I] Shl 03h}
Ed:=ord(Name[I]); {ED = Name[I]}
ed:=ed*(x); {ED=ED*Offset}
inc(x);
eb:=eb+ed; {Add ED to EB}
Key:=Key+EB; {Add EB to KEY}
end;
end;
Key:=Key+(SerialNum shr 3); { Add SerialNum shr 03h to Key}
{ From here, this is just HEX2STRING --> I`m quite sure it's
Self explaintory, else - go and learn number bases again! ;-)}
KeyHex:='';
repeat
digit:=Key mod 16;
key:=key div 16;
If digit<10 then KeyHex:=Chr(Digit+ord('0'))+KeyHex;
If digit>10 then KeyHex:=Chr(Digit-10+ord('a'))+KeyHex;
until key=0;
writeln('Your Key:',KeyHex);
writeln(' Enjoy!');
end.

[Master]

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

verry simple.. get the latest version from h**p://slysoft.com download it , install, restart.

now that it's installed. Click in the "Read to Image" icon.. click next to get to the next screen.. select "Protected PC Game" click next.. and after it makes the image.. exit the program..

Now re-open CloneCD
click on the "Write from image" icon.. clicik next.. select "Protected PC Game" and click next.. NOTE:!! i tested this method with an CD-RW.. so far i wont/cant test with a CD-R (shouldn't make a difference) because i'm down to my last 3 CD-R's.. so you can try a CD-R.. i dont care but sofar i tested with the TDK 80min/700mb CD-RW blanks..

now i had it working without a patch.. after i burnt the disc.. i installed the sims from the burnt copy and tried to load.. IT Worked! i've got the sims in the background as i speak!.. not sure if anyone else knew about this but i got this idea in a dream about Digimon and Dragon Drive.. (DONT EVEN ASK WHY!) but "Guilmon" and "Chibi" said Tom.. to make a Perfect copy of The Sims CD's.. Use Clone CD.. afterwards . i woke up.. and i tried it! henh .. uncanny hunh?

[Master]

 Services You Can Disable

There are quite a few services you can disable from starting automatically.
This would be to speed up your boot time and free resources.
They are only suggestions so I suggestion you read the description of each one when you run Services
and that you turn them off one at a time.

Some possibilities are:
Alerter
Application Management
Clipbook
Fast UserSwitching
Human Interface Devices
Indexing Service
Messenger
Net Logon
NetMeeting
QOS RSVP
Remote Desktop Help Session Manager
Remote Registry
Routing & Remote Access
SSDP Discovery Service
Universal Plug and Play Device Host
Web Client


--------------------------------------------------------------------------------

Cleaning the Prefetch Directory

WindowsXP has a new feature called Prefetch. This keeps a shortcut to recently used programs.
However it can fill up with old and obsolete programs.

To clean this periodically go to:

Star / Run / Prefetch
Press Ctrl-A to highlight all the shorcuts
Delete them

--------------------------------------------------------------------------------

Not Displaying Logon, Logoff, Startup and Shutdown Status Messages

To turn these off:

Start Regedit
Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciessystem
If it is not already there, create a DWORD value named DisableStatusMessages
Give it a value of 1

--------------------------------------------------------------------------------
Clearing the Page File on Shutdown

Click on the Start button
Go to the Control Panel
Administrative Tools
Local Security Policy
Local Policies
Click on Security Options
Right hand menu - right click on "Shutdown: Clear Virtual Memory Pagefile"
Select "Enable"
Reboot

For regedit users.....
If you want to clear the page file on each shutdown:

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementClearPageFileAtShutdown
Set the value to 1

--------------------------------------------------------------------------------

No GUI Boot

If you don't need to see the XP boot logo,

Run MSCONFIG
Click on the BOOT.INI tab
Check the box for /NOGUIBOOT

---------------------------------------------------------------------------------
Speeding the Startup of Some CD Burner Programs

If you use program other than the native WindowsXP CD Burner software,
you might be able to increase the speed that it loads.

Go to Control Panel / Administrative Tools / Services
Double-click on IMAPI CD-Burning COM Service
For the Startup Type, select Disabled
Click on the OK button and then close the Services window
If you dont You should notice

--------------------------------------------------------------------------------

Getting Rid of Unread Email Messages

To remove the Unread Email message by user's login names:

Start Regedit
For a single user: Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionUnreadMail
For all users: Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUnreadMail
Create a DWORD key called MessageExpiryDays
Give it a value of 0

------------------------------------------------------------------------------

Decreasing Boot Time

Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
The program is called BootVis

Uncompress the file.
Run BOOTVIS.EXE
For a starting point, run Trace / Next Boot + Driver Delays
This will reboot your computer and provide a benchmark
After the reboot, BootVis will take a minute or two to show graphs of your system startup.
Note how much time it takes for your system to load (click on the red vertical line)
Then run Trace / Optimize System
Re-Run the Next Boot + Drive Delays
Note how much the time has decreased
Mine went from approximately 33 to 25 seconds.

--------------------------------------------------------------------------------
Increasing Graphics Performance

By default, WindowsXP turns on a lot of shadows, fades, slides etc to menu items.
Most simply slow down their display.

To turn these off selectively:

Right click on the My Computer icon
Select Properties
Click on the Advanced tab
Under Performance, click on the Settings button
To turn them all of, select Adjust for best performance
My preference is to leave them all off except for Show shadows under mouse pointer and Show window contents while dragging

---------------------------------------------------------------------------

Increasing System Performance

If you have 512 megs or more of memory, you can increase system performance
by having the core system kept in memory.

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementDisablePagingExecutive
Set the value to be 1
Reboot the computer

---------------------------------------------------------------------------

Increasing File System Caching

To increase the amount of memory Windows will locked for I/O operations:

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management
Edit the key IoPageLockLimit

-----------------------------------------------------------------------------

Resolving Inability to Add or Remove Programs

If a particular user cannot add or remove programs, there might be a simple registry edit neeed.

Go to HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesUninstall
Change the DWORD NoAddRemovePrograms to 0 disable it

4096 - 32megs of memory or less
8192 - 32+ megs of memory
16384 - 64+ megs of memory
32768 - 128+ megs of memory
65536 - 256+ megs of memory

[Master]

How To Make Your Own Radio Station

Must HAVE Winamp (Any Version)
First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)
Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)

Now, Your gonna have to download the Shoutcast Files.

Go to www.shoutcast.com to get the files.

Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.

Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)
The Portbase: change it to whatever port you want it
Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through www.no-ip.com, PORT NUMBER, whatever u did in the EDIT.txt, and your password.

Then go to Encoder, and choose your quality of your music. Go back to OUTPU>OUTPUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http://(your address that you added in the prefrence)

[Master]

HOW TO MANUAL - THE END OF DELETERS  

"- - = $$$$$$$$$$ = - -
HOW TO MANUAL - THE END OF DELETERS
===================================
CREATED BY: [Piratez] 04/11/01

TABLE OF CONTENTS
=================

Title Line

1. Introduction_______________________________________________________23
2. Invisible Directories______________________________________________36
3. Inaccessable Directories___________________________________________83
4. Smart Directories__________________________________________________135
5. Undeletable Files__________________________________________________168
6. Ultimate Protection________________________________________________199
7. FAQ________________________________________________________________228
8. Contacts___________________________________________________________250
9. Credits____________________________________________________________256


Introduction
============

This doucmentation should not be used to exploit webservers. Some of the
techniques used here have certain outputs that can crash old servers making
them unusable. Throughout this manual, techniques will be passed on from
exploits found in the 'windows' OS. That 'ACTUALLY' helps in the prevention
of deletion. There are lots of methods in stopping a deleter, without the
ANY restrictions set on the server but most have some weak point. After
comming across foure new techniques, making a folder 'invisible' or
undetectable from an ftp client LIST fuction. Making folders/directories
inaccessable and clone prevention, creating smart directories which slows
down the users attempt. I'm sure most users would thank me for this,
'undeletable files'. After experiencing rock solid protection and safe
files. I decided to document it for future reference of the next generation
of software pirates.


Invisible Directories
=====================

The idea of invisiable directoires came about when I came across paths that
were "/ /example/" and was not listed in the main folder but was still
'accessable'. These can be created in all directories without other users
knowing it exists unless being searched for 'MANUALLY', which takes ages at
the present time to search through each folder for "/ /".

Creating Invisible Directories
------------------------------
1. before
******************************************************************
./pub/
./images/
./_vti_pvt/
./_vti_cnf/
./_vti_log/
./temp/
******************************************************************

2. after
******************************************************************
./ /~/temp/tagged/for/team/warezpiratez/fxp/ <- hidden folder
./pub/
./images/
./_vti_pvt/
./_vti_cnf/
./_vti_log/
./temp/
******************************************************************

To create the hidden folders, make a new dir. as follows using this method.
[backslash][space][backslash][foldername1][backslash][foldername2]...
ie. / /foldername1/foldername2/...
the 'space' isn't a name but a 'character' that does not get listed,
therefore making the directories impossible to view.

NOTE: Making the hidden folders several LAYERS/SUB-DIRECTORIES deep is
recommended.
ie. / / / /~/temp/tagged/for/ /team/warez/ /piratez/fxp/
meaning.

This technique is not 'anti-deletion proof' but hidden from deletion proof!
Wink
Read more to find out how to combine ALL THREE TECHNIQUE to make it
'REMOTELY' impossible to delete. Please note the 'quotes', REMOTELY in a
sense that remote/local host. The 'siteadmin' can still 'delete' the folder
"if he's around that is Smile"


Inaccessable Directories
========================

Inaccessable directories prevents the user from 'entering' the folder
period. The user will not be able to enter the folders unless knowing the
'entire' remote path.

Creating Inaccessable Directories
----------------------------------

1. before
****************************************************************************
**********************************
./temp/tagged/for/team/warezpiratez/fxp/
./pub/
./images/
./_vti_pvt/
./_vti_cnf/
./_vti_log/
./temp/
****************************************************************************
**********************************

2. after
****************************************************************************
**********************************
./COM1 / temp/tagged/for/team/warezpiratez/fxp/ <- inaccessable directories,
due to 'COM1' former windows bug.
./pub/
./images/
./_vti_pvt/
./_vti_cnf/
./_vti_log/
./temp/
****************************************************************************
**********************************
To create inaccessable folders, use the following list of 'UNUSABLE NAMES'

COM1 COM1 COM3 COM4 (Windows COM PORTS)
LPT1 LPT2 LPT3 LPT4 (Windows Printer Ports)
AUX
NUL

Make a new folder "COM1[space][backslash][space][backslash]
ie. /COM1 / /

NOTE: This makes the folder inaccessable, even to the siteadmin.(unless
accessed from DOS, local with access to the machine.)

To use the dir. Create a new folder called
"COM1[space][backslash][space][foldername1][backslash][foldername2]
ie. /COM1 / / ~/temp/tagged/

NOTE: This folder is still inaccessable, if a user attempts to enter it. To
gain access to the folder, the 'full path' must be known. To enter the
folder use the RAW command 'CWD' change dir. path. to enter the folder.
ie. CWD /COM1 / / ~/temp/tagged/ and voila the folder is usable and working.

TIP: Creating the folder 'several' LAYERS/SUB-DRIECTORIES deep. It is
impossible to enter.


Smart Directories
=================

This technique involves, the creation of directories that are 'COPYRIGHT' Wink
How's that for a simple description. The idea is to create directories that
would contain [peroids] thorough each of the subdirectories or segmenets.
The use of this is quite sipmle, note the word 'COPY'RIGHT. Most users use
the ftp://login :password at ip :port/path/ format for faster access to an ftp.


Creating Smart Directories
--------------------------
To create 'smart' directories. Make the folder names of each sub directories
contain a period before, inside, and after words within the subdirectories
creating a fake 'file' recognition. The Widows based clients will assume the
folders to be files with windows using its 8.3 format for file names
1. before
****************************************************************************
**********************************
ftp://anonymous@anonymous@123.456.789:21/temp/tagged/for/team/warezpiratez/f
xp/
****************************************************************************
**********************************

2. after
****************************************************************************
**********************************
ftp://anonymous@anonymous@123.456.789:21/temp/tagged ./for . /team. /. warez
.piratez/fxp
****************************************************************************
**********************************

NOTE: Be as creative as possible with the dot formation, to prevent COPYING
of all folders through each directories. The idea is to make the directories
act as file extensions therefore when copied, it will be 'queued'
and the user has to enter the directories MANUALLY. Other 'SYMBOLS' can be
used NOT ONLY just periods. But I find this most common, if the creator
intends to create a catch phrase 'memorable' to him alone.

****************************************************************************
**********************************
QUEUE: 1. /temp/tagged ./for . /team. /. warez .piratez/fxp <- result of
folder extensions
****************************************************************************
**********************************


Undeletable Files
=================

Sad that we had to resolve to this but, this might be the end of deletion as
we speak. I find no other method out there that can accomplish this task
except setting restrictions from the server. This method involves the file
being self-protected. Meaning the files are 'accessable'/'downloadable' but
can NOT be deleted. The idea is to make the file corrupted/crash making it
'in use'.

Creating Undeletable Files
--------------------------
To create a self protected file, rename the entire file including the
extensions to the follwoing format
filename[space][period]/[space]/ ie. filename ./ / The / / in the name as
shown above in the previous example
of creating invisible directories makes the .extesion impossible to view on
the pub as a windows recognized mime
but, once dowloaded it will be shown and accessable. How's that for wits.
Wise up deleters, ~censored~ off!

1. before
****************************************************************************
**********************************
warezpiratez.rar <- rar mime, winrar.
****************************************************************************
**********************************

2. renaming
****************************************************************************
**********************************
warezpiratez ./ /
****************************************************************************
**********************************

3.
****************************************************************************
**********************************
warezpiratez <- unknown file(undeletable,downloadable) <- file will take the
correct mime format on localhost
****************************************************************************
**********************************


Ultimate Protection
===================
The ultimate protection is OBVIOULY, YOUR SELF and YOUR wits against the
deleters. Use private FTPs, get
fast sites T1+, but in this case, it would be the combination of all four
techniques. Using them into one major and
thoughtout plan.

Creating The Ultimate Protection
--------------------------------

To create the ultimate protection that is desirable, first of all, create
the invisible folders as shown above, several sub.dirs deep. Then creating
an 'inaccesable' folder within those invisible folders. Then the next step
is to create those smart directories so it slows down ANY attempt to gain
full access, and also it makes to user run into inaccessable folders
because. The idea is to trap the user before those folders using the smart
directories idea. I didn't think that was ingenieus but just common sense
and seemd smart!.

1. before
****************************************************************************
**********************************
/temp/tagged/for/team/warezpiratez/fxp/ <- no protection
****************************************************************************
**********************************

2. after
****************************************************************************
**********************************
/ / /./ ./COM1 / temp/tagged ./for . /team. /. warez .piratez/fxp <-
protection(still weak)
****************************************************************************
**********************************

NOTE: You can be creative with this technique, make it more complex, I
didn't do it in this manual because then
that would make YOU just confused. I hope this helps, and please UNDERSTAND.
It is not hard, unless YOU didn't read
from the Introduction. I made this well detailed. For it to be as simple as
possible.

FAQ
===

1. What is a SUB-DIRECTORY
- It is the folder that is second/inside another folder. ie.
firstfolder/subdir/

2. What is a pub
- Short for public ftp. There are, no restrictions/protection on the access
over files. Some
have them in most cases but then uploads/downloads are denied. Some would
not allow fxp.

4. What does all this mean?
- Good question, this means that there should be more warez around in the
future. More gamez for YOU, more appz
for me. Wink You too.

5. Who are deleters?
- Deleters are mean and NASTY people, shit faces. There spammers and lame
sometimes ANTI-PIRACY groups that hang
among us, without knowing. Deleting files when possible to stop the warez
scene or just being GAY!

6. What can I do to help?
- You can help the WAREZ scene, getting this manual to them informing them
of HOPE! and not DOH!PE


Contacts
========

[Piratez] - EFnet IRC


Credits
========

This manual was inspired from the makers of other how to stop the deleter
manuals but never worked or at least it was not doucmented in detail to
understand much. The information was gathered from other sources that had
some lines of credit others none. All samples and examples are original,
well planned out. Unless a flaw is dettected, please report for another
release. I REALLY hate deleting bitches. Thanks goes to #NBK(EFnet IRC) and
other linux members for bug fixing windows and its exploit to help stop
spammers/deleters around the world. Your skills are HIGHLY admired and
apprechiated. Keep the warez scene alive. Greets goes out the the deleters,
with one last request. DELETE ME NOW BITCH!


THE END
Pr.by Master

[Master]

 How to modify *.exe files

learn how to change *.exe files, in 5 easy steps:

1) Don't try to modify a prog by editing his source in a dissasembler.Why?
Cause that's for programmers and assembly experts only.

try to view it in hex you'll only get tons of crap you don't understand.
First off, you need Resource Hacker(last version). It's a resource editor-
very easy to use, You can download it at h**p://www.users.on.net/johnson/resourcehacker/

2) Unzip the archive, and run ResHacker.exe. You can check out the help file too


3) You will see that the interface is simple and clean. Go to the menu FileOpen or press Ctrl+O to open a file. Browse your way to the file you would like to edit. You can edit *.exe, *.dll, *.ocx, *.scr and *.cpl files, but this tutorial is to teach you how to edit *.exe files, so open one.

4) In the left side of the screen a list of sections will appear.
The most common sections are
-String table;
-RCData;
-Dialog;
-Cursor group;
-Bitmap;
-WAV.
*Icon: You can wiew and change the icon(s) of the program by double-clicking the icon section,chossing the icon, right-clicking on it an pressing "replace resource". After that you can choose the icon you want to replace the original with.
*String table: a bunch of crap, useful sometimes, basic programming knowladge needed.
*RCData: Here the real hacking begins. Modify window titles, buttons, text, and lots more!
*Dialog:Here you can modify the messages or dialogs that appear in a program. Don't forget to press "Compile" when you're done!
*Cursor group: Change the mouse cursors used in the program just like you would change the icon.
*Bitmap: View or change images in the programs easy!
*WAV:Change the sounds in the prog. with your own.


5) In the RCData,Dialog,Menu and String table sections you can do a lot of changes. You can modify or translate the text change links, change buttons, etc.


TIP: To change a window title, search for something like: CAPTION "edit this".
TIP: After all operations press the "Compile Script" button, and when you're done editing save, your work @ FileSave(Save as).
TIP: When you save a file,the original file will be backed up by default and renamed to Name_original and the saved file will have the normal name of the changed prog.
TIP: Sometimes you may get a message like: "This program has a non-standard resource layout... it has probably been compressed with an .EXE compressor." That means that Resource Hacker can't modify it because of it's structure.

[Master]

really easy. but this only works if the original motherboard and harddrive still work. so put it back together. for newbies, go to control panel, double-click the system icon, go to hardware tab, and click device manager button. find the IDE ATA/ATAPI CONTROLLERS and expand the tab. not the primary or secondary controller, but right-click the first controller. choose update driver. choose the option to install from a list or specific location. click next. now choose the (don't search. I will choose the driver to install) option. click next. now highlight the Standard Dual Channel Pci Ide Controller. click next. the Standard controller will install. now reboot. log in. the standard controller is completely installed. you can now shutdown the computer, remove your harddrive, and it will boot with the new motherboard. i've done this 24 times on 12 different computers. it works.

[Master]

How To optimize DSL-CABLE connection speed

First, u need to goto Start, then run. Type in regedit in the box. Next, goto the folder HKEY_LOCAL_MACHINE\System\CurrentControlSet\VxD\MSTCP
Now, find the string DefaultRcvWindow . Now, edit the number to 64240 then restart your computer. There you go. High speed cable modem now with out dloading a program. Original value is 373360

[Master]

How to recover MOST of scratched CD data discs

I learn an old thecnique to how to recover damaged or scratched disks
with some lost of data. In this case i have one borrowed game - MAX PAYNE 2
with a chunck of 4 mb lost with a scratch in CD1 Install. Here we cover some
special thecniques of how to create a full working CD from the scratched one.

First some tools will be needed:

1. Alcohol 120%
2. UltraISO
3. Windows XP/2000 (not tested on 95/98/me)
3. Small piece of cotton
4. Dry cleaner paper
5. Finally, oil for cooking.

First step - preparing the CD

Get the cotton and drop some water, start cleaning vertically the surface of CD.
Do it 3 times and dry the water with a piece of dry cleaner paper. With a new piece
of cotton, drop some oil for cooking and start to wet the surface like you are
washing the CD with the oil. Dry carefully now. Some particles of oil will stay on the
microsurface of the scrath. It's okay. Seems the oil helps the laser of the CD/DVD driver
to read the surface again. Sure this will work with small unreadable scratchs - some hard
scratchs loose parts of the surface of the CD where we have data and it's lost forever.
But if it is loosed try anyway. Whith this tip 80% of the small scratched CD's coud be
recovered.

Second Step - testing the CD

With Alcohol 120% make an ISO - image making wizard - and lets see if the app can
read the loosed surface. In my case Alcohol 120% had recovered 60% of the data.
This is not enough. Have tryed other appz, they do not recover all the data. But the
CD/DVD driver laser CAN recover all data in this case. the data is still there, what we do?

third step - making the new CD

With the main copy system of windows explorer you can do it. Just create one folder
with the same name of the CD label for future burn reference, and copy the CD content
to the folder. When the CD copy process find the scratch, in majority of the cases, it's
slow down the reading and will recover ALL loosed data.If not, it just tell you there's
an unreadable sector. In this case your CD is lost. But it's not my case, finally
windows explorer got all the data from the scratch and made a copy in the folder.
with the ultraISO, wrote the original CD label, drop the content of the folder and
save as Iso. You can Test the new CD just mounting the iso in the Alcohol 120%. In my
case i did ISO of the two discs from MAX PAYNE 2 and tested installing from the mounted
ISO. Works like a charm. I got the 4 mb lost again. So, I have burned the CD and now i
have a working copy from the scratched one.

Sounds too bizzarre, but works. Course you can jump the cleaning process and try to copy
the content with Windows explorer. But in my case did not work without oil...