How to Bypass BIOS Passwords
کد:
How to Bypass BIOS Passwords
BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS
DISCLAIMER
This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.
Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:
Using a manufacturers backdoor password to access the BIOS
Use password cracking software
Reset the CMOS using the jumpers or solder beads.
Removing the CMOS battery for at least 10 minutes
Overloading the keyboard buffer
Using a professional service
Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.
--------------------------------------------------------------------------------
Backdoor passwords
Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.
WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords
Award BIOS backdoor passwords:
ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598
AMI BIOS backdoor passwords:
AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO
PHOENIX BIOS backdoor passwords:
phoenix, PHOENIX, CMOS, BIOS
MISC. COMMON PASSWORDS
ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj
OTHER BIOS PASSWORDS BY MANUFACTURER
Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba
TOSHIBA BIOS
Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot
IBM APTIVA BIOS
Press both mouse buttons repeatedly during the boot
--------------------------------------------------------------------------------
Password cracking software
The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.
Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS
--------------------------------------------------------------------------------
Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings
Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.
--------------------------------------------------------------------------------
Removing the CMOS Battery
The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.
--------------------------------------------------------------------------------
Overloading the KeyBoard Buffer
On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.
--------------------------------------------------------------------------------
Jumping the Solder Beads on the CMOS
It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.
--------------------------------------------------------------------------------
Using a professional service
If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.
By Master
Gmail : Master.huricane@gmail.com
How To Bypass Web Filters, tutorial.
کد:
How to bypass web filters
There are several occasions where you will be at a public te How to bypass web filters
rminal, and require access to a particular website that is blocked for some reason or another. How to bypass these restrictions is a very common question, and will be covered here.
Lets pretend for a moment that the Internet is made up of 26 websites, A-Z. The web filter blocks your browser from accessing sites X-Z, but not sites A-W. Simply make the browser think you’re going to A-
W. There are a variety of ways to do this:
Proxy Servers:
This is a list of http proxies. These sites may not be up forever, so you may need to search for “free http proxy” or “public proxy servers” or other similar terms.
Proxy server lists:
• http://www.aliveproxy.com
• http://www.multiproxy.org
• http://www.publicproxyservers.com/index.html
• http://www.tehbox.com/proxy
• http://www.proxz.com
• http://www.proxy4free.com/index.html
• http://free-proxies.com
Now that you have a list of proxies, you would open IE (internet explorer) and click on Tools > Internet Options > Connections > LAN Settings > Advanced. Enter the address and port of one of the servers from the list in the proper area (http) and make sure the “use a proxy server for your LAN” option is selected. Remember to replace the proxy and port at your terminal to the original when you're done.
*Note: Some proxies listed may not work, and this method may decrease your surfing speed. By trying various entries, you’ll find one that works, or works faster.
The infamous translation trick:
Go to a web page translation site and use their services to “translate a page to English” thus accessing the blocked page through their trusted site.
You’ll notice that several translation sites are blocked, but by using less popular ones, this method can still be effective. Here is a list of some translation services. Again, these sites may not be up forever, so you may need to search for them.
• http://babelfish.altavista.com
• http://world.altavista.com
• http://translation.langenberg.com
• http://freetranslation.com/web.thm
Url Scripting:
Url scripting is the easiest method. It works on a select few web filters and is based on the same principal as the translation trick. By typing and address like “www.yahoo.com@www.restricted_site.com the filter will not go into effect as it recognizes the trusted site (in this case yahoo.com)
Other tricks:
Simply open the command prompt and type:
Ping restricted.com ? restricted.com obviously being the restricted site
At this point you can take down the IP address (ex. 216.109.124.73) and enter it into the browser. If access to the command prompt is also restricted, see “How to bypass restrictions to get to the command prompt.” If this article has been taken from information leak, then know that it involves anything from opening the browser, selecting view > source, then saving it as X.bat and opening it to opening a folder or browser and typing in the location of cmd.exe depending on the OS. I will not go into further, as this a completely different topic.
Use https://restrictedsite.com as referring to it as a secured site may confuse the filter.
Note: These are ancient methods that many new filters defend against, but still may be applicable in your situation. If not, a little history never hurt anyone.
Web based Proxies:
Another one of the easier, yet effective methods include web based proxies. These are simple in the fact that you just enter the restricted address and surf! Some of these have some restrictions, like daily usage limits, etc but you can also use another proxy (perhaps one that sucks, like a text only) to bypass their restrictions as well. Here is a list of some:
• http://proxify.com]http://proxify.com
• http://www.anonymizer.com/index.cgi]http://www.anonymizer.com/index.cgi
• http://www.guardster.com/]http://www.guardster.com/
• http://anonymouse.ws/anonwww.html]http://anonymouse.ws/anonwww.html
• http://www.the-cloak.com/login.html]http://www.the-cloak.com/login.html
• https://www.megaproxy.com/freesurf]https://www.megaproxy.com/freesurf
• http://www.anonymizer.ru]http://www.anonymizer.ru
• https://nadaily.com/cgi-bin/nph-proxyb.cgi]https://nadaily.com/cgi-bin/nph-proxyb.cgi
• http://www.userbeam.de/cgi-bin/nph-userbeam.cgi]http://www.userbeam.de/cgi-bin/nph-userbeam.cgi
• http://www.free2.surffreedom.com/nph-free.cgi]http://www.free2.surffreedom.com/nph-free.cgi
Proxy Programs:
There are many proxy programs that allow you to surf anonymously that are more or less based on the same topics we’ve covered here. I’ve added them just to cover the topic thoroughly:
• http://www.hotscripts.com/Detailed/28480.html]http://www.hotscripts.com/Detailed/28480.html
• http://www.inetprivacy.com/a4proxy/anonymous-grc.htm]http://www.inetprivacy.com/a4proxy/anonymous-grc.htm
• http://www.orangatango.com/home/index.ie.html]http://www.orangatango.com/home/index.ie.html
• http://www.steganos.com]http://www.steganos.com
• http://www.anonymization.net]http://www.anonymization.net ? toolbar that requires admin rights to install
Making your own CGI proxy server:
Making your own proxy server may come in handy, but I personally find that simply uploading a txt file/w a list of proxies to a free host makes for a much easier and headache free solution. If you don’t know PERL, there is code out there to help you set it up. Check out these sites for more info:
• http://httpbridge.sourceforge.net]http://httpbridge.sourceforge.net
• http://www.jmarshall.com/tools/cgiproxy]http://www.jmarshall.com/tools/cgiproxy
• http://www.manageability.org/blog/stuff/open-source-personal-proxy-servers-written-in-java/view]http://www.manageability.org/blog/stuff/op...en-in-java/view
Admin Access:
When all else fails, you can simply take over the PC and alter or delete the damn filter. This method varies according to the OS (operating system) you are dealing with. Please see “Hacking Windows NT” for more information. If this tutorial has been taken from information leak, then I will go as far as to say it involves booting the PC in another OS, copying the SAM file and cracking it using a program like saminside or LC5 rather than start a whole new topic within one.
How To Capture Streaming Media
کد:
HOW TO CAPTURE STREAMING MEDIA
many websites (http://ww.smashits.com) stream songs and videos
people believe they cannot be downloaded, quite why i dont know. they kinda think there is no file present to dwnld
once the file is located it can then be retrieved by nettransport
nettransport is able to dwnld any file whether ftp or rtsp etc
1. Download Project URL Snooper 1.02.01 from http://rain66.at.infoseek.co.jp/
2. Install URL Snooper (and WinPcap together)
3. Don't run URL Snooper when it is done installing
4. Restart computer
5. Open Project URL Snooper
6. Click on the General Options Tab
7. user posted image
8. Chose a network adapter
9. Now click on the search tab
10. Click Sniff Network
11. Go to a webpage and you should see some results in the results list
12. If nothing is appearing then chose another network adapter, until one works
13. Now you are ready to begin searching
14. Click the "Hide Non-Streaming URLs" option to hide all http:// references and only show URLs corresponding to streaming audio/video (rtsp, pnm, wma, etc.)
15. Then click Sniff Network
16. Your links should appear as you begin streaming your file
17. Select your desired stream user posted image
18. usually rm file user posted image
19. On the bottom there should be the link which you simply copy user posted image
20. Download nettransport from here ftp://down_transport:123@s1.5fox.com/NT2Setup_multi.EXE or
ftp://nettransport:nettransport@61.153.24...Setup_multi.EXE
http://lycos26486.l97.lycos.com.cn/download.htm
21. Install it
22. Click on new
23. Paste link
now you should be able to download any file
if u need ne help
jus ask
i think dialups may have problems
How To Change A Cmos Battery
کد:
First the safety rules
The inside of a computer is a bad place full of electricity and sharp edges.
On the electricity side always when working on you computer make sure that it’s still plugged in to the power socket and the power is turned off, this is to ensure that any static
From you is discharged through the earth. The inside of most computer cases are unfinished metal and has very sharp edges so be careful.
The first signs of a battery failing are:-
1) your clock starts running slowly
2) when you boot (start) your computer it has a problem finding your hardware (no hard drive, no cd rom)
To change the battery you need the following tools
1) a X-point screwdriver
2) an anti-static strap(optional)
3) a new battery (seems logical)
Then unplug all the cables from the back of the computer as you remove them make a note where they came from. (So when you finished you can put them back)
Move the computer somewhere where you can work on it with ease
Remove the cover by locating the screws around the outer edge (back) of the computer
Some computer cases only require you to remove 2 screws on one side then a panel can be removed allowing you access to the computers insides, others you must remove 6 screws and remove the whole case by sliding it to the rear and lifting it off.
Now make sure that you read the safety instructions about static.
Look inside you will see a round silver thing that looks about the size of a 10p piece (quarter). This is the battery itself, carefully lift the retaining clip and slide the battery out. That’s it removed now go to your local computer retailer, electrical retailer (Tandy/Radio shack) taking the old battery with you and get a new battery.
Back to your computer insert the new battery by lifting the clip and sliding the battery in.
Reinstall your case and plug all the cables back (you did remember to label them didn’t you)
Now for the fun part.
You will now need to go into you bios….
Right the bios is the god of your computer.
To access it, when your computer first starts you will see a black screen with white text.
If you look carefully you will see a line that says something like "press del for setup" or some other key (F2 or ESC or tab) this will take you to god's house where you can make lots of changes to the way your machine works.
It is also the place where you can make your nice computer in to a rather expensive door stop so be careful and don’t go playing with anything.
You will now be presented with a blue screen with a lot of options on it,
The one we want is load optimised/default settings.
Press the F10 key and type y the computer should now reboot.
If every thing went well then your computer will now be up and running.
Shizers way: Keep computer running. Lay it on it's side and remove side cover to expose MoBo. Take any thin object, "small screwdriver, knife point, wood shiskabob skewer. Pull back the battery retaining clip. Toss the old battery in the junk recepticle, unless you belong to greenpeace and want to save the earth. Install the new battery. No need to reset bios becasue the compter supplies voltage to the cmos while it is running. Reset or resync clock with internet. Done!
How to change the serial number used in Windows XP, Valid for XP Corporate
کد:
Step 1
Open Start/Run... and type the command:
regedit and click "OK" (or press ENTER).
Go to HKey_Local_Machine\Software\Microsoft\WindowsNT\Current Version\WPAEvents,
on the right double click on "oobetimer" and change at least one digit of this value to deactivate windows.
Click "OK" and close the Registry Editor.
Step 2
Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).
This will bring up the "Activate Windows" window.
Check the option for "Yes, I want to telephone a customer service representative to activate Windows" and click "Next"
Step 3
Then click "Change Product Key" (don't enter any information on that screen)
Step 4
Type in the new key and click "Update"
The activate Windows by phone window will reappear at this point, just close it by clicking the X in the upper right hand corner
Step 5
Reboot your system and Open Start/Run... and type the command:
%systemroot%\system32\oobe\msoobe.exe /a and click "OK" (or press ENTER).
If you see "Windows is already activated" then everything is OK.
How To Change Thumbnail Size And Quality
کد:
If any of you out there like to use the thumbnail view, especially for browsing through photos and images, it can become a bit of a drain on your system. It is possible to lower the thumbnail size and quality by editing the following registry keys.
Open the registry and navigate to :
HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer
Create a new DWORD value called ThumbnailSize, and set the value between 32 and 256.
And/or create another DWORD value called ThumbnailQuality, and set the value between 50 and 100.
Key Details :
USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailSize
Data Type: REG_DWORD (DWORD Value)
Data Value: 32 - 256
USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailQuality
Data Type: REG_DWORD (DWORD Value)
Data Value: 50 - 100
How To Convert File System, fat - fat32 to ntfs
کد:
How To Convert File System, fat - fat32 to ntfs
open a dos prompt and give the command
convert d: /fs:ntfs
this command would convert your d: drive to ntfs.
if the system cannot lock the drive, you will be prompted to convert it during next reboot.
Normally you should select yes.
Conversion from fat/fat32 to ntfs is non-destructive, your data on the drive will NOT be lost.
Be aware that converting to ntfs will make that partition of your
drive unreadable under dos unless you have ntfs utilites to do so.
How To Copy A Dvd Which Will Play On A X Box
کد:
How To Copy A Dvd Which Will Play On A X Box
HOW TO COPY A DVD WHICH WILL PLAY ON A X BOX
TOOLS YOU WILL NEED:
DVD decrypter
DAEMON TOOLS
DVD2ONE
NERO 5.5.10 or above.
1. Rip the DVD in ISO mode with DVD decrypter to your hdd.
(mode=ISO-read)
2. Right click DEAMON TOOLS icon on your desktop
virtual cd/dvd rom
Device 0 [k] no media
Mount Image - ISO file
3. Make a main folder ( title MOVIE ) on your desktop.
make 2 subfolders in it VIDEO_TS and AUDIO_TS
4. Open DVD2ONE. choose movie only or entire disc.
source - drive you mounted in step 2 (VIDEO_TS)
Destination - VIDEO_TS folder you created in step 3.
start
5. DEAMON TOOLS - unmount the drive you made in step 2.
you can now delete the ISO file to save disc space
6. open NERO
close wizard
New Compilation DVD
Left Column (DVDROM/UDF/ISO)
No Multisession
UHF check Force DVD compatability (required for x box)
Label ( NAME OF MOVIE ) ALL CAPITAL LETTERS
Click New
drag over the VIDEO_TS FOLDER and AUDIO_TS folder you made
BURN
