Pooya007
22-12-06, 23:18
1. Take front faceplate off by inserting credit card 1 between housing and silver key. As you pull up, take credit card 2 and slide it on the side of the phone prying the clips off.
Only the registered members can see the link
Only the registered members can see the link
2. Unscrew these 6 screws at the edges with the T6 screwdriver and release the 4 clips surrounding the LCD screen.
Only the registered members can see the link
3. Slip the little black frame off of the LCD screen, and lift the screen. You should now see a screw. Removing this screw removes the back cover.
Only the registered members can see the link
4. That’s it! Put your new faceplate or housing in and figure out how to put things back by following the directions here in reverse order.
Only the registered members can see the link
Only the registered members can see the link
2. Unscrew these 6 screws at the edges with the T6 screwdriver and release the 4 clips surrounding the LCD screen.
Only the registered members can see the link
3. Slip the little black frame off of the LCD screen, and lift the screen. You should now see a screw. Removing this screw removes the back cover.
Only the registered members can see the link
4. That’s it! Put your new faceplate or housing in and figure out how to put things back by following the directions here in reverse order.